Tools Needed:
- Torx T10 Screwdriver
Step 1:
*** Make sure you turn your machine off and unplug the power before proceeding. ***
Step 2:
Using Torx T10 screwdriver, remove the 4 screws holding the electronics cover from the back of the machine.


Step 3:
The SD-Card is located towards the top left side of the controller board.

Step 4
Eject the SD-Card by gently pushing down on it. You will feel a click when it is released from it’s socket.


Contact us if you run into any problems: help@darklylabs.com