This pattern is just one example of the intricate detail you can engrave with the Emblaser.
For this project, we cut the design from black card and mounted it in a picture frame. We mounted the laser cut pattern slightly off the back of the picture frame, which allows a nice shadow pattern to form at various angles.
Project Files
Materials:
Although you can use this design on any material, we used 200 gsm black card for this project.
Other Items Needed:
- Tweezers (Optional)
The Build
1: Load the LightBurn project file and set it for the material and thickness you are using.
2: Once cut, carefully remove it from the machine, and remove any of the cut outs left behind. (Tweezers recommended for this)
