Date: 26 Jan 2025
Description
The Emblaser Pro does not correctly perform the ‘Homing’ sequence.
This is evident when the laser does not move fully to the back of the machine, followed by fully to the left side of the machine during the homing process.
Firmware version exhibiting the problem: epro_fw-2_2_1659.bin
Cause
Homing parameters are triggering incorrectly.
Status
Resolved.
Solution
This issue has been resolved with Controller Firmware epro_fw-2_2_1661.bin onwards
Please download the latest firmware version and install on your Emblaser Pro.
