These designs are just some examples of what can be done with our ECM Contact Film on the Emblaser.
Project Files
Materials:
Note: Settings in this project are for black contact film, for white, change the power to 100%.
Other Items Needed:
- None
The Build
1: Load the LightBurn project file and set it for the material thickness (0.1mm) and colour you will be using.
2: Cut the designs out of your contact film.
3: Peel away the negative material.
![](https://darklylabs.com/wp-content/uploads/2021/10/Decal-Project-with-Darkly-Labs-Contact-Film-360002115415_A51BCECD-FC00-4FD1-B994-F6AF2E8B7FD9.jpeg)
![](https://darklylabs.com/wp-content/uploads/2021/10/Decal-Project-with-Darkly-Labs-Contact-Film-360002115415_4B5247B2-16DA-4D50-ADFE-3ED21AF8B6FE.jpeg)
![](https://darklylabs.com/wp-content/uploads/2021/10/Decal-Project-with-Darkly-Labs-Contact-Film-360002115415_7B9BDB00-F2D9-4408-91AA-AA78168897C8.jpeg)