Create a lightweight and detailed checkerboard to play on.
Project Files
Materials:
- 300mm x 500mm Plywood (I used 3mm Poplar Plywood but any material will work)
Other Items Needed:
- None
The Build
1: Download the LightBurn files and open them. (Adjust settings if needed)
2: Place your sheet of plywood into the machine.
3: Cut the pieces out, gently popping the checkers and board out of the sheet.
4: Enjoy!
![](https://darklylabs.com/wp-content/uploads/2021/11/cutting01-1024x768.jpg)
![](https://darklylabs.com/wp-content/uploads/2021/11/build01-1024x768.jpg)