This Bull trophy head sculpture makes a great display piece.
Other Items Needed:
1: Load the Project file into LightBurn and cut the pieces out of your plywood sheets. There should be 41 pieces.
2: Once cut, pop out each part carefully and lay them out.
3: Each piece has a letter engraved next to a slot. Simply match the letters up and slot the pieces together.
Assemble in 3 sections, the head, and then the 2 horns separately.
Apply a small amount of glue in the slot before sliding the pieces together. Once the pieces are together all of the engraved letters will be hidden by the plywood!
4: With the 3 main sections complete, slot the horns into the bull head and your sculpture is complete!
Hang it up on a wall with the provided holes!