• 0


These 3D printed Flexi-things are a lot of fun. 

And now, using an Emblaser you can make them as well!

Project Files


  • 3mm or 6mm Plywood
  • Fabric (We used an old t-shirt)

Other Items Needed:

  • Glue

The Build

1: Load the LightBurn project file and set it for the material and thickness you will be using.

2: Cut the panels out of your rigid material of choice.

3: Cut the flexible layer from fabric of your choice.

4: Glue together!

The inspiration for this feline comes from feketeimre’s design