WESP 09 – Polypropylene Masks

Our lead designer (Chris) loves working with polypropylene. It cuts easily, is flexible and super tough. Along with that, it can be formed into shapes with some heat.

When I asked him for a quick weekly project using this material, he whipped up these intricate masks that I couldn’t resist making.

 

The Project Files

This project is designed for the Emblaser range: LINK

Download the project files here: LINK

 

The Build

This project is almost as simple as you can get. There aren’t any complicated processes involved, so it can be made very quickly.

I ended up using 0.8mm black and 0.6mm white polypropylene because it’s what I had on hand. You can certainly use other colors or materials for this project. Thick card may work just as well.

LightBurn project file.
 

Cutting polypropylene on the Emblaser is quick and easy. Before cutting, be sure you have your machine vented adequately, or have your fume extractor turned on.

Polypropylene sheet in Emblaser workspace ready to cut.
 

After cutting you may notice a white residue over your parts. This is common when laser cutting polypropylene and is more visible on darker colors.

Residue left behind after laser cutting.

I used a lint-free cloth and a small amount of isopropyl alcohol to easily clean the residue away.

Residue cleaned.
 

With the parts cleaned, I decided to add a little contour to them so they would fit on a face better. I used a plaster life-cast and a hot-air gun for this process.

Hot air gun used to shape the masks.

I set the air temperature to 120 degrees C and slowly heated the mask to slightly soften it. I was careful to keep the air moving over the mask and not let it sit in one place for too long. This would have caused the plastic to overheat and melt.

With the mask warm and soft, I pressed it onto the face mould and held it in place while it cooled.

Be careful when using a hot air gun. It can burn you!

 

The final result looked great and I can see a lot of possibilities for similar projects using these techniques. I hope you can too.

Completed masks.
 

As with all our Weekly Emblaser Small Projects (WESP), you can find the laser cutting files in the project section of our Help Centre. If you haven’t been following our weekly projects, make sure you check this section for other Emblaser related projects.

Click here for more projects

Cart